Revolving door TSA 325 NT
45
Options
5.5.2 Distributing the pulley holders
If the pulley holders are distributed unevenly, the tooth belt tension will fluctuate greatly. This can cause
the following problems:
à
System cannot be taught correctly
à
System does not close completely
à
System outputs the error “Obstacle” during opening or closing
2
1
1
Small spacing
2
Large spacing
X
Distribute the pulley holders so that they are evenly distributed between the deflection pulley or motor pulley
and the inner-most pulley holder.
This will keep the tooth belt tension roughly equal across the entire travel path.
=
=
=
=
=
=
X
Define the positions of the drivers on the leaves in relation to the pulley holders and mount accordingly.
