Revolving door TSA 325 NT
52
Options
5.6.3 Aligning the floor ring
X
Align the floor ring and drive box every 30–40 cm using a levelling device and underlay it.
X
Align the drive box correctly.
The top edge of the drive box is 24 mm lower than the top edge of the floor ring.
5.6.4 Screwing the floor ring together
X
Screw the levelled floor ring and drive box to the unfinished floor using the brackets (3).
X
Weld the bracket (3) to the base of the floor ring or of the drive box.
X
The drive box and the guides for the night-time closer in the floor have to be connected to a functioning floor
guide drainage by means of the supplied empty pipes (approx. 10 m).
X
Lay the empty pipe for the cabling of the sensor equipment and power supply of the drive.
X
Before filling the hole with screed check whether the corresponding conduits for all the required cables have
been laid and the connected floor guide drainage functions.
X
Close the drive box with the supplied stainless steel panels.
