Revolving door TSA 325 NT
102
Revolving door TSA 325 NT, 3-leaf
Screw the mounted upper part pivot bearing (1) onto
the glass leaf:
X
Push the bushing (6) into the drill hole in the glass leaf.
X
Screw the upper pivot bearing (1) onto the glass
leaf with a screw (8), metal plate (7) and intermedi-
ate plate (5).
Screw tightening torque
max. 4 Nm
.
X
Ensure that the metal and glass do not come into con-
tact with one another while screwing in.
The protective leaf fittings can also be glued to the leaf ex
works as an option.
5
Intermediate plate for partition from the glass
6 Bushing
7
Metal plate
8 Screw
Mounting the lower pivot bearing (Y)
Mounting the upper part of the lower pivot bearing:
X
Screw the threaded pin (2) into the hinge (1) for
protective leaves.
