Revolving door TSA 325 NT
103
Revolving door TSA 325 NT, 3-leaf
Screw the mounted upper part of the lower pivot
bearing (1) onto the glass leaf:
X
Push the bushing (4) into the drill hole in the glass leaf.
X
Screw the mounted upper part of the lower pivot
bearing (1) into the glass leaf with a screw (6) and
intermediate plates (5)
Screw tightening torque
max. 4 Nm
.
X
Ensure that the metal and glass do not come into
contact with one another while screwing in.
The protective leaf fittings can also be glued to the leaf
ex works as an option.
3
Intermediate plate for partition from the glass
4 Bushing
5
Metal plate
6 Screw
Mounting the floor bearing
X
Screw the floor bearing (3) onto the sickle
plate (4) with 2 screws (2).
X
Insert the sphere (1) and grease heavily.
The sphere (1) must be heavily greased to
à
ensure it moves freely in the floor bearing and
à
to prevent it from falling easily out of the spher-
ical cap when attaching the protective leaf.
