Revolving door TSA 325 NT
27
Installation
4.5.4 Façade connection (optional)
The façade connection is an equipment option, and can be included in the scope of delivery if requested by the customer.
The façade connection consists of the following components:
à
10 mm flat material; to compensate between the drum wall and canopy
à
U profile; to mount the façade panel
à
Façade panel; thickness, width and colour as requested by the customer
à
Cylinder head screws (M4×20); included in the screw box/assorted box
1
Façade profile, top
2
Façade panel profile, side, left, and right
3
Cylinder head screw M4
×
20
4
U profile, left and right
5
Flat material, left and right
6
Butt connector strip, left and right
X
Place the flat material (5) on the butt connector strip
(6) of the side panel with a thin silicone joint (7).
X
Place the U profile (4) on the flat material (5) with
a thin silicone joint (8).
X
Screw the flat material (5) to the butt connector
strip (6) using M4x20 cylinder head screws (3).
X
Insert the side façade panel (2) into the U profile
(4) and connect to the existing façade.
X
Attach the top façade panel profile (1) above the
door to the façade using appropriate steps and
seal.
4.6 Check list for commissioning and service
X
Complete the check points according to the check list in “Commissioning and service”.
