iSXblue/SXBlue II GNSS Series Technical Reference Manual
28
1.4.1 Setting up for Submeter Work
For applications requiring only submeter positioning, a softhat for the Precision Antenna is provided
when you order the Standard Package. The supplied antenna mounting plate can also be used in a
backpack or survey rangepole setup. Proper installation of the receiver and cable in the carrying case is
shown in the subsection below.
1.4.1.1 Using the Nylon Carrying Case
The nylon carrying case features a belt loop and can also be used with a belt clip or a shoulder strap. The
pictures below show how to properly run the antenna cable in the carrying case.
Note that a small opening on the side allows
recharging the battery pack without having to
remove the receiver from the case.
Figure 1-6 Carrying Case
1.4.1.2 Using the Softhat
When using the softhat or the antenna mounting plate, the magnet adaptor should be removed from the
Precision Antenna. Simply locate the four screws at the bottom of the antenna and use a “Philips” type
screwdriver to remove the magnet adaptor.