iSXblue/SXBlue II GNSS Series Technical Reference Manual
83
01/01/1900
This field is the subscription begin date
1/01/3003
This field is the subscription expiration date and also acts as subscription
code enumerator (See 4.2.10, $JK command)
1.1
This field is the application software (or firmware) version number
46
This field is a place holder
5.2.19
$JBOOT
Power down the Eclipse engine and then power it back up. This allows you to reboot the receiver to drop
the satellite to which it is currently locked and retune to another satellite without cycling the power of the
Eclipse II.
$JBOOT<CR><LF>
If MFA is the current application and you send the $JBOOT
command, the response is similar to the following:
$>STARTED,MFA,Ver=1.2Qe
If any application other than MFA is the current application and
you send the $JBOOT command, the response is similar to the
following:
$>
5.2.20
$JFORCEAPP
Force an application to be used in a multi-application (MFA)
Note:
This command is not saved; it is only for the current session.
$JFORCEAPP,app<CR><LF>
where 'app' is one of the following applications:
•
AUTO = allow automatic selection of the application in the MFA (default setting)
•
RTK
•
SBAS
Response to issuing command to force an application to be used
$>
