GE Sievers 900 Series, Operation And Maintenance Manual

Page: 160 / 236

GE Analytical Instruments ©2009 160 of 236 DLM 90488-01 Rev. A
Single-Point Calibration Worksheet
Company Name ___________________________ Date ________________________
Analyst Name ____________________________ Firmware Version _____________
Analyzer Serial Number ____________________
TOC Autozero Performed (Y/N): ______
(Line 1)
Reagent Flush Performed (Y/N): ______
(Line 2)
Concentration of Standard: ______
(Line 3)
Enter data for the TC Calibration:
Expected Measured % Diff Adjusted
Blank N/A ________ ________ ________
________ ________ ________ ________ ________
Enter data for the IC Calibration:
Expected Measured % Diff Adjusted
________ ________ ________ ________ ________
Calibration pass/fail based upon the following criterion:
• The % Diff value for each IC standard is ±10% or less.
Calibration Results: Passed Failed
Calibration Action: Applied Canceled
% Diff = Measured Concentration - Expected Standard Concentration
Expected Standard Concentration
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
100%
×