iBox/iBox Kit
Installation and Maintenance Guide
GE Grid Solutions
102
994-0047-5.10-4
GE Information
Configuring iBox Device Properties - LAN
, continued
Procedure:
Configuring
Device
Properties
- LAN
[continued]
Step
Action
6
Click the
Processor
tab.
7
On the
Memory Model
tab, ensure that
Derive From iBox Hardware
Setting
is selected.
8
Confirm the settings are as shown above, and modify them if they are not.
9
Click the
LAN Settings
tab, and then click the
General
tab.
10
Confirm the settings are as shown above, and modify them if they are not.
11
Click the
LAN Specific
tab:
12
Enter the
Host Address
.
Note:
The
Host Address
is set to [(PPP IP Address of the Ethernet
Module) + 1]. The iBox and Ethernet Module PPP IP addresses
are related, as outlined in “IP Addressing” on page 81.
Note:
Do not change the
Ethernet Address
settings.
13
Click
OK
to save.
Next Step
The next step is:
•
Configuring the iBox PPP Driver on page 103
Summary of Contents for iBox
Page 172: ......
