GE F60 UR Series, Instruction Manual

Page: 377 / 558

GE Multilin F60 Feeder Protection System 6-23
6 ACTUAL VALUES 6.3 METERING
6
6.3.8 IEC 61580 GOOSE ANALOG VALUES
PATH: ACTUAL VALUES
ÖØ
METERING
ÖØ
IEC 61850 GOOSE ANALOGS
The F60 Feeder Protection System is provided with optional IEC 61850 communications capability. This
feature is specified as a software option at the time of ordering. Refer to the
Ordering section of chapter 2
for additional details. The IEC 61850 protocol features are not available if CPU type E is ordered.
The IEC 61850 GGIO3 analog input data points are displayed in this menu. The GGIO3 analog data values are received
via IEC 61850 GOOSE messages sent from other devices.
6.3.9 WATTMETRIC GROUND FAULT
PATH: ACTUAL VALUES
ÖØ
METERING
ÖØ
WATTMETRIC GROUND FAULT 1(2)
This menu displays the wattmetric zero-sequence directional element operating power values.
6.3.10 TRANSDUCER INPUTS/OUTPUTS
PATH: ACTUAL VALUES
ÖØ
METERING
ÖØ
TRANSDUCER I/O DCMA INPUTS
Ö
DCMA INPUT xx
Actual values for each dcmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.
PATH: ACTUAL VALUES
ÖØ
METERING
ÖØ
TRANSDUCER I/O RTD INPUTS
Ö
RTD INPUT xx
Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID and
the bottom line as the value.
„
IEC 61850
„
GOOSE ANALOGS
ANALOG INPUT 1
0.000
MESSAGE
ANALOG INPUT 2
0.000
↓
MESSAGE
ANALOG INPUT 16
0.000
„
WATTMETRIC
„
GROUND FAULT 1
WATT GND FLT 1:
0.000 W
„
DCMA INPUT xx
„
DCMA INPUT xx
0.000 mA
„
RTD INPUT xx
„
RTD INPUT xx
-50 °C