Modifications reserved
Page 22/103
OPM_LPS_33E_60K_M12_2GB_V010.doc
Operating Manual
LP 33 Series 60-80-100-120 kVA / S2
5 INSTALLATION
5.1 TRANSPORT
The UPS is fixed on transport socket suitable for forklift, which include a special layer of
Ethafoam
to
protect the equipment against the transport shock. Normally the UPS is packaged with carton box.
On request the equipment can be packaged in wooden case.
The UPS must be moved in
upright position
.
Do not tilt cabinets
more than +/- 10°
during handling.
Move the UPS in its
original package
to the final destination room.
Do not stack other package on top
: they could damage the upper side of the cabinet.
NOTE !
When moving the UPS, pay attention to:
FRAGILE
SENSITIVE
TO DAMPNESS
TO HEAT
SENSITIVE
TO FROST
SENSITIVE
Forklift
The UPS may be lifted with a forklift in upright
position from right and left side.
Take note of the centre of gravity marked on the
package.
NOTE !
Check for sufficient floor and elevator loading
capacity.
Transport UPS only in upright position.
Do not stack other package on top of the UPS.
Forklift
Crane
Fig. 5.1-1 LP 33 Series lifting
Crane
If the UPS has to be lifted by crane, use suitable
carrying belts taking note of the centre of gravity
marked on the package.
Take all necessary precautions to avoid
damage to the cabinet while hoisting the UPS
.
WARNING !
When loading / downloading and when
moving the UPS, it is forbidden:
When loading / downloading and when
moving the UPS, pay attention to:
