GE HEALTHCARE CARESCAPE Monitor B450, Technical Manual

Page: 99 / 236

Configuration
91
2062973-003
activation process with a delay during an active patient case, but the new settings will activate
only after the next case reset / patient discharged.
1.
Log in to Webmin.
2. Select Configuration > Settings .
3. In the Sub-Modules for Settings menu, select Activate .
4. In the Activate Settings window, select the settings that you want to activate:
• Select Cloned settings (clinical and platform) to activate both the clinical and
platform settings.
• Select Cloned clinical settings to activate only loaded clinical settings.
• Select Cloned platform settings to activate only loaded platform settings.
NOTE: Activation of the cloned clinical or platform settings will not effect the following
settings in the target patient monitor:
−
Network
− Unit and Bed Name
−
Host Asset Settings
− Licenses
Remember to configure the unaffected settings manually in the target patient monitor.
NOTE: Check and manually modify the following WLAN settings after activating them in
the destination monitor:
−
RTS Threshold
− Fragmentation Threshold
−
TXOP for Best Effort
− TXOP for Background
• Select Factory default settings to restore all platform and clinical settings back to
the factory defaults.
• Select US default clinical settings to restore all clinical and platform settings back
to the US specific factory defaults.