GE HEALTHCARE CARESCAPE Monitor B450, Technical Manual

Page: 86 / 236

CARESCAPE Monitor B450
78
2062973-003
4. Select Save .
These settings take effect immediately after they are submitted.
Settings to view 12SL data
1. Log in to Webmin.
2. Select Configuration > MUSE/12SL .
3. In the MUSE/12SL window, enter the following:
4. Select Save .
These settings take effect immediately after they are submitted.
7.8 Admit settings
7.8.1 Patient ID prefix
The patient monitor will automatically generate a temporary, unique patient ID when a patient
with unknown ID is admitted to the patient monitor. The patient monitor will use this temporary
patient ID for all 12SL reports that are sent to MUSE until the patient is discharged from the
patient monitor, or his/her patient ID is changed. The temporary patient ID is generated from
the temporary patient ID prefix, care unit name, bed name, and current time.
The temporary patient ID prefix is a hospital defined prefix that is used as the first two
characters in a temporary patient ID to ensure its uniqueness inside the hospital.
1.
Log in to Webmin.
2. Select Configuration > Admit Settings .
3. In the Sub-Modules for Admit Settings menu, select Patient ID Prefix .
4. In the Patient ID Prefix window, enter a 2-character prefix.
NOTE: Valid values are uppercase letters and numbers.
5.
Select Save .
All changes take effect immediately.
- Location ID Identifies the location ID number (within the range 0 to 599)
associated with the patient monitor for searching the MUSE
system.
- Site Number Identifies the site number (within the range 1 to 254) associated
with the patient monitor for searching the MUSE system.
- MUSE Web Username Username used to authenticate with the MUSE
Web to access 12-lead reports.
- MUSE Web Password Password used to authenticate with the MUSE
Web to access 12-lead reports.
- Confirm Password The password and the confirmed password must
be the same.
- MUSE Web URL Used to locate the MUSE Web system to access
12-lead reports. Enter the URL in a valid format.