GAS GC-IMS-SILOX, User Manual

Page: 50 / 145

49
12
Workflow: Current Loop
Setup
12.1 Introduction
The device transmits the measured concentration of the main substance as
electrical current to the 0-20 mA-current loop interface.
This is done only in the interval mode. See
11
Workflow: Running .
Application Mode
Output Substance
SILOX1
Total Si
SILOX2
Total Si
For further information on measurement concentration ranges see 5.2
Calculating Concentrations .
The concentration range of the output substance is mapped to a sub-interval
within 0-20 mA.
Outside this sub-interval a mA-error value and a mA-idle value can be defined.
The error value is set when a measurement has failed to produce a valid
concentration.
The idle value is set when no valid concentration is available yet or when the
interval mode is not active.