GAS GC-IMS-SILOX User Manual Download Page 109

Page: 109 / 145

108

Protocol

Indicates the selected File Transfer Protocol,
SMB, SFTP and TFTP are supported. Change the
Protocol using the

Edit Server Details

Dialogue

Box.

User

Indicates  the  Username  for  which  the
Connection  is  set  up.  Username  and  Password
can  be  changed  in  the

Edit Server Details

Dialogue Box.

Server IP

Indicates the active Server IP Adress. It can be
changed in the

Edit Server Details

Dialogue Box.

Sharename

Indicates the name of the shared folder which
has to be shared with the indicated

User

on the

Server with the indicated

Server IP.

It can be

changed in the

Edit Server Details

Dialogue Box.

Test

Use the

Current Connection

Button to start a

testing protocol. The status of the active
connection will be reported.

Summary of Contents for GC-IMS-SILOX


















































































































































Search results

Summary of Contents for GC-IMS-SILOX

Reviews:

Related manuals for GC-IMS-SILOX

Brands by name

Popular brands

GAS GC-IMS-SILOX, User Manual

Search results

Summary of Contents for GC-IMS-SILOX

Reviews:

Related manuals for GC-IMS-SILOX

Brands by name

Popular brands