100
GalStar
Instruction 1.0
Communication Sensor (424):
This screen shows the values of the sensors transferred by
communication from other controllers. Press “Comm. Sensor” in the “Sensors Screen – 42” to
access the “Comm. Sensor Info – 424” screen.
Communication Sensor Definition (4243):
The process of defining parameter transfer from
one controller to another is fully described in the “Galileo PC Software Installation” manual.
Note: the Gal-Star can work in a network with other Gal-Star controllers and Galileo controllers.
The data can be transferred between all of the controllers in the network.
Screen Explanation:
Assign the “Buy” number from the “Common Variable Table” for every communication sensor.
Non-Linear Sensors (425):
The normal sensors (previously described) are linear i.e. the graph
is a straight line. In some cases the sensor device does not support a straight line then it has to
be corrected. The method of correction is by assigning several points along its graph. The first
screen (425) shows the values of the defined “Non-Linear” sensors (after manipulation).
6. Gal-Star Software Setup Instructions
