23
GalStar
Instruction 1.0
3. Basic Operation
•
Cycles Left Today:
The number of cycles remaining in the irrigation program. If the
program is programmed in more than one sequence then this number is the total number of
cycles of the program that have already started.
•
Last Irrigation:
o
Water Delivered (M3 -THG):
The amount of water in cubic meters that have passed
through the water meters in the last irrigation program (that has already finished).
o
Fert A Done (LTR - Gallon):
The amount of fertilizer that Fert No.A pump has fertilized
since the start of the irrigation program. This item only appears if the pump is defined.
o
Fert B Done (LTR - Gallon):
See pump A.
o
Fert C Done (LTR - Gallon):
See pump A.
o
Last Flow (M3/Hr - GPM):
If the program is running, this is the current flow rate, if the
program is not running it is the flow rate at the moment the program ended.
o
Last EC:
The EC reading at the moment the program ended.
o
Last pH:
The pH reading at the moment the program ended.
o
Time Done (Min):
The number of minutes since the start of the irrigation program.
o
Last Irrigation End Time:
The time that the irrigation program ended (if the program
is running the time displayed will be the time that the previous cycle ended).
o
Last Irrigation Date:
The date that the irrigation program ended.
•
Next Irrigation Time
•
Next Irrigation Day
3.4 Program Programming:
Any irrigation operation is carried out via the “Irrigation Programs”.
In order to program/edit the “Irrigation Program” press “Main”>“Head-1”> “Prgrms Prog.” to
access the “Irrigation Program Programming - 122” screen:
Screen Explanation:
•
Priority:
Information only (see “Program Constants”).
•
Valves:
Information only (see “Program Constants”). Shows the numbers of up to five
valves of the program.
