12
GalStar
Instruction 1.0
2. Tutorial
2.2.4
Setting System to Active:
Press the “Select” key to change the parameter “System
Setup” from “N.Active” to “Active” then press “Enter”. Press “Esc” and then “Enter” to
confirm the changes. You will return to the “Technical Menu” screen.
2.3
Defining the Input/Output (62):
In the “Technical Menu” screen press the “IO Concts” “function
key” to access the “I/O Connection” screen in which the I/O cards installed are shown. Then
press the “Head 1 Conn” “function key” to access the “Head 1 Connections” screen (621).
2.3.1
Setting the Output of Valve No. 1 (6214):
Press the “Valves” “function key”.
In the above “Valve Connections” screen, assign: “Slot number 2” / “Port number 1” to
valve number 1 (the numbers are according to the example shown but obviously you
must enter the number of the slot according to the location of the output card in your
controller hardware setup). Press “esc” and confirm by pressing “enter”.
set
