104
GalStar
Instruction 1.0
General:
The Gal-Star controller can be connected to a PC thus enabling remote control
operation via direct connection, long distance cable connection, long distance radio connection
and the most advanced cellular connection. The communication between the PC and the Gal-
Star controller is carried out using the same platform (center program) as the Galileo. For Center
software installation please refer to the “Galcon PC Software” manual. Communication with
the Gal-Star requires the Center version 08HL or higher. In addition the Gal-Star application
software version 1.11 or higher must be installed. In this chapter we will show how to setup an
irrigation program including fertigation. For an explanation of all other screens please refer to the
explanations described in the previous chapter in operation by the controller keyboard.
The main screen is designed to use the “My Gal-Star” program which is similar to the Galileo
Open Field’s “My Field” program.
Programming:
In order to program an irrigation program using fertilizer, first program the
fertilizer program, then assign the fertilizer program to the irrigation program whilst program the
rest of the irrigation program.
Programming the Fertilizer Program:
Click the “Fertilizer” button in the main screen to open the “Fertilizer Program” screen:
Click 2
Click 1
Current
Status area
7. Gal-Star PC Operation
