53
GalStar
Instruction 1.0
4. Advanced Operation
o
No Unit:
Number of filter is out of range.
o
UnitTim:
Flush duration is out of range.
o
No Cond:
No condition for flushing (no flushing program).
o
P.D.Inp:
Definition error of the pressure differential stat input.
o
W.Mt.No.:
Water meter number out of range.
o
W.Mt.Df:
Definition error of the water meter.
o
Qnt.Def:
Definition error of quantity between flushes.
o
Tim.Def:
Definition error of the time between flushes.
•
Daily Flushes:
The number of flushes since midnight.
•
Since Flush – M3 (Gallon):
The amount of water delivered since the last flush.
•
Since Flush H:M:
The time passed since the last flush.
•
Curr. Flush Unit:
The number of filter that is currently flushing.
•
Continous Flush:
When working with a pressure differential stat and immediately after flushing
the pressure stat is still on “On” status. Another flush is carried out but this also suggests that the
filters are badly clogged and the flushing does not help. After a few flushes it is considered a fault.
This parameter shows the number of continuous flushes.
•
Flush Require * (Yes/No):
The system requires flushing but sometimes something else prevents
the flushing.
•
P.D Switch Stat * (On/Off).:
The pressure differential stat status.
•
Logic Conditions Status * (On/Off)
(3 parameters).
•
Line Fill Delay * (Yes/No):
During pipeline filling the pressure is low and it is not recommended
to flush. This parameter shows if the system is in the status of “Line Fill Delay”.
