18
GalStar
Instruction 1.0
2.7 Program Constants:
2.7.1
Press “Main Menu”>“Head1”>”Prgrms Sequnc” to access (12):
2.7.2
Press “Prgrms Consts” to access (123):
2.7.2.1
Press the “down” key once to reach “Program Setup”, select “Active”.
2.7.2.2
Change the “Water Unit” parameter to “Min:Sec”.
2.7.2.3
Set the first valve of the program to No. 1. Press “Enter”.
Press “esc” and confirm by pressing “enter”. You will return to the “Irrigation
Program” screen in which the “program status” parameter should be “Strt Tim” (i.e
there is no start time defined) (please note: this can take up to a minute).
2. Tutorial
press
