32
GalStar
Instruction 1.0
Irrigation Program (12):
Press “Prgrms Sequenc” to enter the “Irrigation Program Information”
screen. For further details see “Basic Operation”.
Program Information (121):
Press “Prgrms Info” to enter the “Program Information” screen.
Shows the status of the program while irrigating.
Screen Explanation:
The parameters only appear when relevant. Some of the parameters shown
here appear in other screens and have already been described.
•
Program Status, Irrigation Status:
(see “Basic Operation”).
•
Water Done (M3):
the amount of water delivered from the start of the irrigation program
.
•
Water left (M3):
the amount of water left until the end of the irrigation program
.
•
Time to End
•
Cycles Done:
the number of cycles carried out since the start of the irrigation program.
•
Cycles Left Today, Current Water Change %:
(see “Program Constants”).
•
Next Cycle Time, Next Irrigation Day, Cycles Remaining:
describe the next irrigation start
(see “Basic Operation”).
•
Operation by Sequence:
The sequence in which the program is currently running.
•
Wait Time Min, Wait Reason:
the time and reason that the program is waiting. The “Reason”
options are:
None, Sequenc
– waiting for its turn in the sequence
, Valve
– another program using the
same valve is currently running
, Water Cnt
- The maximum number (5) of programs that can be measured
by the same water meter has been exceeded
, FrtCntr
– the fert center is busy. For example: if two
programs “want” to fertilize with different fertilizer programs.
, L.Prior
–see “Priorities” in “Programming”
,
WtrFlow
– water flow exceeds the limit
, Timing
– out of time/date range
.
4. Advanced Operation
