106
GalStar
Instruction 1.0
The previous screen shows information about the irrigation program from which you can access
the programming screen. You can now click on the “programming” button to receive a multi
program screen or on the number of the program to access a single element presentation
screen.
1. Enter the water program by selecting the “Water Unit” and program the “Programmed
Amount” parameter.
2. Program the “Fert Program” by assigning the number (1) of the previous fertilizer
program. Enter “Water Before” and “Water After” if necessary.
3. In the “Programmed Timing” section (lower left) program the “Start Time”, select “Cyclic”
for “Daily or Days in the week”.
4. After a few seconds the “Next Irrigation Timing” (if it was zero) will change to the next
start time. The program should start working at this time.
1
4
3
2
7. Gal-Star PC Operation
