37
GalStar
Instruction 1.0
4. Advanced Operation
Valves Status (13):
Press “Valves” in the “Head Status – 11” screen to access the “Valves Status” screen.
Screen Explanation:
•
Valve Status:
The options are:
N.Active, Ready, Irrigat, Cond.Op
– operation condition
(including “start” and “operate” conditions)
, Cond.Cl
– close condition (including “pause” and “stop”
conditions),
Man.Opn
(not controlled by the program)
, Man.Cls
(not controlled by the program)
, Out
Def
- Output definition error
, MisFlow
– definition of nominal flow rate is missing when it is essential,
for example: when working according to flow rate limit
, W.Mt.No
- number of water meter out of
range
, W.Mt.Df -
error in the water meter definition
, W.M.Mis
– the water meter definition is missing
when water meter is required
.
•
Current Irrigation:
Information about the water, fert, time, flow rate and by which program it is operated.
•
Programmed in Prog:
In which programs (up to 3) the valve is programmed.
(Valve) Last Irrigation (131):
Press “Last Irrigation” in the “Valves Status -13” screen. This screen
shows information about the irrigation that has already finished. The amount of water, fertilizer and time
along with the flow rate, ECpH and the date and hour the irrigation was carried out is displayed.
Valves Daily (132):
Press “Valves Daily” in the “Last Irrigation -131” screen to access the “Valves Daily”
screen. This screen is similar to the previous screen with the difference that it refers to daily rates.
