42
GalStar
Instruction 1.0
Fertilizing Status (14):
Press “Fert” in the “Head 1 Status -1” screen to access the “Fertilizing
Status - 14” screen.
Screen Explanation:
In this screen there is a list of parameters showing the fertilization status.
The parameters are:
•
Fertiliz. Status:
The options are:
N.Acitve, Ready, Fertil., Alarm, NoPmps, Pmp Def, ECpH
Df, MainFrt
– error in the definition of the main fert output
, Prg.Err.
•
Running Program:
The number of the fertilizer program currently running.
•
EC/pH Data:
(9 parameters): The values of the actual readings, momentary average, alarm,
extreme and required are shown.
•
A list of alarms
that include
: Uncontrolled Fert, No Fert. Pulse., Fert Flow Fail.
They appear
when relevant (in the case of an alarm).
•
Main Fert. Status (N.Exist, Off, On)
•
Irr. Program A-E
(up to 5 parameters
):
Shows the number of the “Irrigation Program” currently
using the fertilizer center. Note that the maximum number of programs that can work simultaneously
with the fertilizer center is five.
•
Auto Corr. EC/pH %
(2 parameters)
:
The percentage of correction of Ec and pH. The parameter
shows the current correction in % above/below the initial setting. See explanation of EC/pH correction
4. Advanced Operation
