Fuji Xerox DocuPrint C5005 d User Manual Download Page 50

Page: 50 / 462

2 Basic Operation

Inside

No.

Name

Description

Drum cartridge release lever

Unlocks this lever when replacing a drum cartridge.

Toner cartridges

Contains Yellow (Y), Magenta (M), Cyan (C) and Black (K) toner.

Main power switch

Switches the main power of the printer on/off. Always follow the instructions by
the system administrator.

Important

• Always switch the power off before switching the main power off.

Refer to

• “2.2 Switching On/Off the Power” (P. 57)

Waste toner bottle (R5)

Contains a waste toner bottle to collect waste toner.

Drum cartridges
(R1, R2, R3, R4)

Contains photoconductors. Drum cartridge names from left to right when facing
the printer are R1, R2, R3, and R4.

Drum cartridge cover

Open this cover when replacing a drum cartridge or cleaning the inside of the
printer.

Fusing unit

Melts toner by heat and pressure to fuse it on paper.

Important

• Do not touch this unit as it is extremely hot.

Summary of Contents for DocuPrint C5005 d














































































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint C5005 d

Reviews:

Related manuals for DocuPrint C5005 d

Brands by name

Popular brands

Fuji Xerox DocuPrint C5005 d, User Manual

Search results

Summary of Contents for DocuPrint C5005 d

Reviews:

Related manuals for DocuPrint C5005 d

Brands by name

Popular brands