Fuji Xerox DocuPrint C5005 d User Manual Download Page 260

Page: 260 / 462

260

6 Troubleshooting

Close Cover N
(N: A, B, C or D)

The Cover N is open. Surely close the displayed cover.

Close Finisher Front
Door

The Finisher Front Door is open.
Surely close the front door.

Close Finisher
Top Cover

The Finisher Top Cover is open.
Surely close the top cover.

Close Front Cover

The Front Cover is open.
Surely close the front cover.

Close Top Cover of
Tray 6

The Top Cover of Tray 6 (HCF B1) is open.
Close the top cover.

Color disabled

Ask Administrator

Print job held as Color feature has been disabled. Print your job in Black & White or
contact System Administrator.

Note

• Pressing the <Information> button will display detailed information on the control

panel.

Drum Cartridge

X needs to be
replaced. Call
your System
Administrator.
(X: R1, R2, R3 or R4)

Some error occurred with the Drum Cartridge X.
Replace the displayed drum cartridge with the new one.

Note

• Pressing the <Information> button will display detailed information on the control

panel.

Refer to

• “ Replacing Drum Cartridges” (P. 297)

Insert Drum
Cartridge X
(X: R1, R2, R3 or R4)

Drum cartridge X is not installed.
Install the indicated drum cartridge.

Refer to

• “ Replacing Drum Cartridges” (P. 297)
• “ Types of Consumables” (P. 292)

Insert Toner
Cartridge: X
(X: Y, M, C or K)

The X toner cartridge is not installed.
Install the indicated toner cartridge.

Refer to

• “ Replacing Toner Cartridges” (P. 294)

Insert Waste Toner
Container R5

The waste toner container is not installed.
Install the waste toner container correctly.

Refer to

• “ Replacing the Waste Toner Bottle” (P. 301)

Insufficient funds

Insert money

The print job has been paused due to insufficient funds. Insert money or use a valid
card to continue.

Note

• Pressing the <Information> button will display detailed information on the control

panel.

Insufficient funds

Insert money /card

Print job has been paused due to insufficient funds. Insert money or use a valid card
to continue.

Note

• Pressing the <Information> button will display detailed information on the control

panel.

Message

Symptom/Cause/Remedy

Summary of Contents for DocuPrint C5005 d














































































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint C5005 d

Reviews:

Related manuals for DocuPrint C5005 d

Brands by name

Popular brands

Fuji Xerox DocuPrint C5005 d, User Manual

Search results

Summary of Contents for DocuPrint C5005 d

Reviews:

Related manuals for DocuPrint C5005 d

Brands by name

Popular brands