350
7 Maintenance
Print Universal Unique ID
UUID is an abbreviation for Universally Unique Identifier which is an assured unique128-bit
value. UUID printing feature prints UUIDs for each print job.
The printed UUIDs can be used as a search key to retrieve print job logs using an
application, such as the ApeosWare Accounting Service (purchase separately) or
AposWare Log Management (purchase separately).
Retrieving the image log with the UUID enables you to verify "when", "by whom", and "with
what service" the document was processed. This prevents leakage of confidential
information.
Note
• For information about the Image Log Control feature, refer to “Security Feature Overview” (P. 343).
1.
Launch your web browser and access CentreWare Internet Services.
Note
• For information on how to access CentreWare Internet Services, refer to “1.6 Configuring the Printer
Using CentreWare Internet Services” (P. 41).
• If you are prompted to enter the administrator's ID and password, enter them and click [OK].
2.
Click the [Properties] tab.
3.
On the menu on the left, click [Security] > [Watermark] > [Universal Unique ID].
The [Universal Unique ID] screen is displayed.
4.
Configure the settings.
5.
After all the settings are completed, click [Apply].
Setting
Description
Print Universal Unique ID
Specifies whether or not to print the UUID.
• [No]
• [Yes]
Print Position
Specifies the Universal Unique ID print position.
• [Top Left], [Top Center], [Top Right], [Bottom Left], [Bottom Center],
[Bottom Right].
Print Position Adjustment
(Length Y)
Allows fine adjustment of the UUID vertical print position in the range of
0 to 100 mm.
Print Position Adjustment
(Width X)
Allows fine adjustment of the UUID horizontal print position in the range
of 0 to 200 mm.
Note
• With 0 mm as the edges of the paper, a larger fine adjustment value
shifts the print position more towards the center of the paper. When
[Top Center] or [Bottom Center] is selected as the print position,
however, the horizontal fine adjustment value for the center of the
paper is 100 mm. When [Top Center] or [Bottom Center] is selected as
the print position, first set the fine adjustment value to 100 mm and
then make fine adjustments.
Print Position (Side 2)
Specifies the reverse side UUID print position.
• [Same as Side 1]
• [Mirror Side 1]
