Fuji Electric FRENIC-VG Series, User Manual

Page: 95 / 346

6.2 PG Interface Expansion Card
6-19
Chap. 6
CO
NTR
O
L O
P
TIONS
6.2.2 Model and specifications
6.2.2.1 Model
• There are two models for the PG interface expansion card, reflecting differences in the external
equipment output interface:
OPC-VG1-PG: Line driver signals
OPC-VG1-PGo: Open collector/voltage output
Take care not to specify the wrong model when placing an order for cards.
The available models of FRENIC-VG's PG options differ according to the external equipment output
interface (line driver output, open collector output/voltage output).
After purchase, the target application can be selected with SW1 on the option.
Model format:
OPC-VG1-PG
( )
PD (pulse detection): For pulse detection
LD (line speed detection): For line speed detection
PR (pulse reference): For input of pulse train commands (pulse
train synchronous operation)
SD (speed detection): For motor speed detection
None: Line driver output model (provides PG broken wire detection
function when SD is selected)
o : Open collector output and voltage output model (no PG broken
wire detection function)
PG: Pulse generator interface expansion card
VG1
→ FRENIC-VG inverter
Accessories
Spacers: 3
Screws (M3): 3
SW1 setting
For example, to perform speed control for a motor that includes a line driver output type encoder, you
would order the OPC-VG1-PG and select SD with the switches as the speed control application. To
perform synchronized operation based on received pulse trains, set the switches to PR.
Table 6.2.1 Configuration of Switches on the Option
Function SW1-1 SW1-2
PD OFF OFF
LD ON OFF
PR OFF ON
SD ON ON
(Factory default)