FreeWave FGR2-IO-IOE, User Manual And Reference Manual

Page: 8 / 131

Connecting 1-5 Volt Sensor to Analog Input 3 or Analog Input 4 83
1-5 Volt Sensor Signal Coupling for Analog Input 3 and Analog Input 4 83
5.3 Plunger Lift Example 86
5.3.1 I/O Master to the RTU 86
5.3.2 I/O Slave to the Well Head 87
5.3.3 Terminal Port Mappings in Tool Suite 88
5.4 Emergency Shut Off Example 89
5.4.1 I/O Master to the Emergency Shut-Off 89
5.4.2 I/O Slave to the RTU at Each Well Sites 90
5.4.3 Terminal Port Mappings in Tool Suite 90
5.5 Tank Level Example 91
5.5.1 I/O Master to the RTU 91
5.5.2 I/O Slave to the Well Head 91
5.5.3 Terminal Port Mappings in Tool Suite 92
5.6 Tubing Pressure Example 93
5.6.1 I/O Master to the RTU 93
5.6.2 I/O Slave to the Well Head 93
5.6.3 Terminal Port Mappings in Tool Suite 94
6. Viewing Radio Statistics 95
6.1 Viewing the Radio Statistics in Tool Suite 95
6.2 Viewing the Radio Transmission Characteristics in the Terminal Interface 95
6.3 Antenna Reflected Power 96
6.4 Master-Slave Distance 96
6.5 Noise Level 96
6.6 Number of Disconnects 97
6.7 Radio Temperature 97
6.8 Rate % 97
6.9 Signal Level 98
6.10 Transmit Current 98
7. Specifications 99
7.1 FGR2-IO-IOE Specifications 100
7.2 FGR2-IOS-C-U and FGR2-IOS-CE-U Specifications 103
7.3 FGRIO-M Specifications 106
7.4 FGRIO-S Specifications 108
7.5 I2-IOM-U Specifications 110
8. Ports 113
Page 8 of 131 LUM0008AG Rev Sep-2015
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.