Wire Replacement I/O (900 MHz): User Manual and Reference Guide
5.6 Tubing Pressure Example
This example illustrates the wire replacement setup for a tubing pressure sensor:
Figure 29: Wire Replacement Tubing Pressure Example
Note
: The wiring portion of the illustration is detailed in these sections.
5.6.1 I/O Master to the RTU
1. Wire the AO1 to RTU Analog Input for the tubing sensor.
Figure 30: I/O Master to the RTU
5.6.2 I/O Slave to the Well Head
1. Wire the terminal ports on the I/O Slave to the tubing sensor.
2. Wire the sensor to ground.
LUM0008AG Rev Sep-2015
Page 93 of 131
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
Summary of Contents for FGR2-IO-IOE
Page 131: ......
