4. Other Radio Settings
Transmit Power
Setting
Description
FreeWave Recommends
: In a wire replacement application,
use a low setting, such as 2 or 3 because the signal does not
likely need to travel a great distance.
l
With a higher power setting with radios within close range can increase
the amount of noise in the system.
l
When testing radios that are in close proximity to one another, set the
Transmit Power
to a low number.
l
When deploying radios to the field, raise the
Transmit Power
number
accordingly.
Important!
: This table is for reference only. All
Transmit Power
settings between
0
and
9
are
approximate.
Setting
Transmit Power
(in mW)
0
5
1
10
2
35
3
80
4
140
5
230
6
330
7
480
8
600
9
800
10
1000
4.1.12 Transmit Rate
Transmit Rate
Setting
Description
Default Setting:
(1) Normal
Options:
(0) Diagnostics
Page 66 of 131
LUM0008AG Rev Sep-2015
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
Summary of Contents for FGR2-IO-IOE
Page 131: ......
