Wire Replacement I/O (900 MHz): User Manual and Reference Guide
9. If connected to the diagnostics port, press <Shift+U> (Capital ‘U’) to activate the
Setup
menu.
View the Setup menu in Board-level Radios
1. Short pins 2 & 4 (Brown to Black) on the 10 pin header next to the LEDs.
2. If using a data cable (Part Number: ASC3610DB or ASC3610DJ), press the Setup
button.
3. If using the gray ribbon diagnostic cable (Part Number: AC2009DC) or the black
diagnostic cable (Part Number: ASC0409DC), press <Shift+U> (capital U) to activate
the Setup menu.
When Setup is activated, the FreeWave Setup Main Menu appears in the terminal emulator
window.
l
All three LEDs on the radio light green (
) and stay green as long as the radio is in
Setup mode.
l
The main setup menu appears:
Figure 5: Example:
Tool Suite
IO Main Menu
Important!
: When navigating through the
Setup
menu and making changes to the parameters, the
parameters are sent to the radio
immediately
.
Note
: See
Troubleshooting Terminal Emulators (on page 127)
for more information.
LUM0008AG Rev Sep-2015
Page 23 of 131
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
Summary of Contents for FGR2-IO-IOE
Page 131: ......
