3. Configuring an I/O Slave
3.7.8 DO Monostable Time
DO Monostable Time
Setting
Description
Default Setting:
0
Options:
Any number between 0 and 255.
Terminal Menu:
(9) FGRIO Setup
Description:
l
Sets the length of time the Digital Output remains on when the
DO Bi-
Stable
parameter is set to
Auto-OFF
.
l
The amount of time is approximately 0.15 seconds x DO Monostable
Time.
l
A setting of
0
causes the Digital Output to turn off at an unspecified
amount of time.
l
This time is always less than 0.15 seconds, but the actual time may
vary.
Page 56 of 131
LUM0008AG Rev Sep-2015
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
Summary of Contents for FGR2-IO-IOE
Page 131: ......
