7. Specifications
7.1 FGR2-IO-IOE Specifications
Specifications may change at any time without notice. For the most up-to-date specifications
information, see the product's data sheet available at
.
FGR2-IO-IOE Specifications
Transmitter
Frequency Range
902 – 928 MHz
Output Power
1 W
Range, Line of Sight
(LOS)
60 miles with clear LOS
Modulation
2 level GFSK, 115.2 Kbps
Occupied Bandwidth
230 kHz
Hopping Patterns
15 per Band, 105 total, user selectable
Hopping Channels
50 to 112, user selectable
Hopping Bands
7, user selectable
RF Connector
Type SMA, TNC (Female connectors)
Receiver
Sensitivity (board-level
only)
-106 dBm at 10
-6
BER
-108 dBm at 10
-4
BER
Selectivity
20 dB at fc ± 115 kHz
60 dB at fc ± 145 kHz
System Gain
140 dB
Data Transmission
(1)
Error Detection
32 bit CRC, retransmit on error
Link Throughput
115.2 Kbps
Data Interface
Serial
Protocol
RS-232/422/485, 1200 baud – 115.2 Kbaud
Data Connector
10-pin header with locking ramp 0.1 inch spacing, power/data connector
Input
Modbus
Wire
Replacement
2: Precision AIs (20 bits, 0-5.625 V, 0.1% FS Accuracy), also
act as exact-threshold DIs
x
x
2: DIs with counters (32 bits, 1000 Hz), also act as aux. AIs (10
bits, 0-3.5 V, 0.25% FS Accuracy)
x
(2)
1: DI with pull down resistor (5 Kohm)
x
Page 100 of 131
LUM0008AG Rev Sep-2015
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
Summary of Contents for FGR2-IO-IOE
Page 131: ......
