4. Other Radio Settings
4.2.6 Multi-Master Synch
The
Multi-Master Synch
setting is reserved for applications with concentrations of Master units
where it is necessary to reduce interference between the Masters.
Note
: This setting does not apply because a wire replacement I/O system has only one Master.
4.2.7 Radio ID
Radio ID
Setting
Description
Default Setting:
Blank
Options:
Any 4 digit, user-defined number.
Terminal Menu:
(5) Edit MultiPoint Parameters > (D) Radio ID
Description:
Use this option to designate a radio with an arbitrary, user-defined, 4-digit
number that identifies the radio in Diagnostics mode.
4.2.8 Radio Name
Radio Name
Setting
Description
Default Setting:
Blank
Options:
Any combination of letters or numbers up to 20 characters
Terminal Menu:
(5) Edit MultiPoint Parameters > (G) Radio Name
Description:
l
Use this parameter to give a radio a name, such as its location.
l
Naming radios can be helpful to identify a radio when in Diagnostics
mode.
4.2.9 Repeater Frequency
Repeater Frequency
is used when a parallel Repeater is present.
Note
: This setting does not apply to an I/O Master or an I/O Slave because a wire replacement I/O
system cannot contain Repeaters.
Page 70 of 131
LUM0008AG Rev Sep-2015
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
Summary of Contents for FGR2-IO-IOE
Page 131: ......
