Franke CL 85 M, Installation And User Manual

Page: 16 / 136

EN
– 16 –
CL 85 M / CM 85 M
Removing the side frames
X
Bend the crosspiece engaged in the fixing
bush downwards and remove it from
the groove.
X
Tilt the frame upwards by approx. 60° and
push it slightly in the direction of inclination.
X
Keeping the frame tilted, remove the two
top hooks from the respective holes.
1
2
3
Fitting the side frames
X
Keeping the frame tilted, insert the top
hooks in the respective holes, pushing
lightly in the direction of inclination.
X
With the frame tilted, pull in the direction of
inclination until the top hooks stop against
the outside of the compartment wall.
X
Turn the frame towards the compartment
wall. Bend the crosspiece engaged
in the fixing bush downwards and remove
it from the groove.
Replacing the oven lamp
Franke ovens are
equipped with
a circular lamp
positioned in the top
left area at the back
of the compartment.
To replace the oven
lamp, proceed as
follows:
X
Turn off the power to the appliance
by means of the omnipolar switch used
for connecting it to the electrical system,
or disconnect the plug if accessible.
X
Unscrew the glass cover (A).
X
Unscrew the lamp and replace it with one
resistant to high temperatures (300 °C),
with the following characteristics:
– Voltage: 220/240 V ~ 50-60 Hz
– Power: 25 W
– Connection: G9
X
Refit the glass cover (A) and reconnect
the power supply.
Caution! Damage to the lamp due to wrong
handling!
Z Avoid touching the lamps with bare hands.
Z Use a cloth or a sheet of kitchen paper.
WARNING! Possibility of electric
shock!
Ensure that the oven is switched off before
replacing the lamp.
WARNING! Electric shock
due to wrong handling!
Z
Switch the oven off.
– Depending on how the oven is installed:
Unplug the oven or disconnect the power
at the main electrical system switch, e.g.,
switch off the fuse of the oven in the fuse
box.
A