Franke CL 85 M, Installation And User Manual

Page: 12 / 136

– 12 –
CL 85 M / CM 85 M
EN
Note: At the end of cooking, the oven remains
at a temperature close to the previously set
value for several minutes; it is therefore wise
to remove the food from inside so as to avoid
overcooking it.
End of cooking with delayed
start
X
Delayed start of cooking can only
be activated following the end of a cooking
process; when set, pressing the right knob
confirms the „stop“, and activates the
blinking LED for the symbol .
X
Turn the left knob (right knob for CL) to also
set the start of cooking time (naturally this
will be before the end, therefore the hands
can only be moved back).
X
Confirm by pressing the right knob again.
X
The data can also be automatically acquired
by allowing the blinking to continue for
10 seconds.
„
The LEDs for symbols and
will remain lit and the oven will switch
on at the set time, when only the LED
for the symbol will remain lit.
„
At the end of cooking, the ringer will
sound for 1 minute; this sound can
be stopped by pressing the right knob.
Setting the time of day
X To set the correct time, just press the knob
three times (the LED for the clock symbol
starts blinking), then turn the left knob
(right knob for CL).
X After setting the right time, press the right
knob to confirm.
Switching on the first time
X
When using the oven for the first time,
operate it empty with the temperature knob
set to maximum for at least 40 minutes and
airing the room.
„
The odour noticed during this
operation is due to the evaporation
of substances used to protect
the oven during the period between
manufacture and installation.
„
After the 40 minutes, the oven will be
ready for use after cooling down.
Suggestions
Z
For successful cooking, never place your
dishes in the oven when it is cold; wait until
it has reached the set temperature.
Z
During cooking, never place pots or
containers directly on the oven floor;
9
place them above the grills or drip-trays
provided, on one of the 5 shelves available;
„
failure to do so could damage the oven
enamel.
Z
Your Franke oven uses a special enamel
which is easy to keep clean, however
it is advisable to clean it frequently to avoid
baking on grime and previous cooking
residues.
Z
Any self-cleaning panels (if provided)
can be cleaned with soap and water (see
cleaning instructions).
Note:
Before switching the oven on, read
the timer instructions (see page 11).