Ford Ranger 2012 Owner'S Manual Download

Page: 118 / 276

GENERAL INFORMATION

WARNINGS

Use load securing straps to an
approved standard, e.g. DIN.

Make sure that you secure all loose
items properly.

Place luggage and other loads as low
and as far forward as possible within
the luggage or loadspace.

Do not exceed the maximum front
and rear axle loads for your vehicle.

Do not exceed the maximum gross
vehicle weight. See

Vehicle

Identification Plate

(page 182).

Do not place solid objects outside
the loadspace area for example
timber and sheet material.

Note:

The center of the payload should be

located within the wheelbase of the vehicle.

Note:

Avoid one sided load distribution.

Note:

Uneven load distribution could result

in unacceptable handling and braking
characteristics.

LUGGAGE COVERS

WARNINGS

Do not move your vehicle with
people or animals in the loadspace.

Do not use the roller shutter pull
strap to secure loads.

Do not sit, stand or place anything
on the roller shutter.

WARNINGS

To service the roller shutter, see an
authorized dealer.

Note:

You must secure the loads carried in

the loadspace.

Note:

Use the pull strap to close the roller

shutter.

Note:

Make sure that the roller shutter is

free of any obstruction before you open or
close it. For example; snow or ice.

Note:

Water and dust may enter the

loadspace with the roller shutter closed.

Operation

The roller shutter has four locking
positions:

Fully closed.

2. 1/3 open.

3. 2/3 open.

4. Fully open.

Note:

The locking mechanism does not lock

automatically as it passes each locking
position.

Locking and unlocking into
position

Note:

You will hear a click as the roller

shutter passes each locking position.

Note:

Use the pull strap to control the roller

shutter movement while opening.

Lock the roller shutter at the required
locking position by pulling the pull strap to
the left.

116

Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing

Load Carrying

Summary of Contents for Ranger 2012





















































































































































































































































































Search results

Summary of Contents for Ranger 2012

Reviews:

Related manuals for Ranger 2012

Brands by name

Popular brands

Ford Ranger 2012, Owner'S Manual

Search results

Summary of Contents for Ranger 2012

Reviews:

Related manuals for Ranger 2012

Brands by name

Popular brands