Ford Ranger 2012 Owner'S Manual Download

Page: 176 / 276

E133594

A. Emergency use only.
B. Maintenance

E134692

Removing a Road Wheel

WARNINGS

Park your vehicle in such a position
that neither the traffic nor you are
hindered or endangered.

Make sure that the wheels are
pointing straight ahead.

If your vehicle has a manual
transmission, move the selector lever
to first or reverse gear. If it has an

automatic transmission, move the selector
lever to position

(P)

Secure the diagonally opposite
wheel with an appropriate block or
wheel chock.

Make sure that the jack is vertical to
the jacking point and the base is flat
on the ground.

Never place anything between the
vehicle jack and your vehicle.

174

Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing

Wheels and Tires

Summary of Contents for Ranger 2012





















































































































































































































































































Search results

Summary of Contents for Ranger 2012

Reviews:

Related manuals for Ranger 2012

Brands by name

Popular brands

Ford Ranger 2012, Owner'S Manual

Search results

Summary of Contents for Ranger 2012

Reviews:

Related manuals for Ranger 2012

Brands by name

Popular brands