Ford Ranger 2012 Page 51 Owner'S Manual Download

Page: 51 / 276

E131480

Left-hand mirror

Off

Right-hand mirror

E131481

Press the controller in the direction of the
arrows to adjust the mirror.

The power exterior mirrors are fitted with
a heating element that will defrost or
demist the mirror glass. See

Heated

Windows and Mirrors

(page 70).

Manual Folding and Unfolding

The power folding mirrors operate with the
ignition on, and for several minutes after
you switch the ignition off.

Note:

They will no longer operate if you

switch the ignition off and open a door.

E131482

Press the button to fold or unfold the
mirrors.

Press the button again to stop and reverse
the direction of movement.

Fold-Away Exterior Mirrors

Push the mirror toward the door window
glass. Make sure that you fully engage the
mirror in its support when returning it to its
original position.

INTERIOR MIRROR

Manual Dimming Mirror

WARNING

Do not adjust the mirrors when your
vehicle is moving. This could result
in the loss of control of your vehicle,

serious personal injury or death.

Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing

Windows and Mirrors

Summary of Contents for Ranger 2012





















































































































































































































































































Search results

Summary of Contents for Ranger 2012

Reviews:

Related manuals for Ranger 2012

Brands by name

Popular brands

Ford Ranger 2012, Owner'S Manual

Search results

Summary of Contents for Ranger 2012

Reviews:

Related manuals for Ranger 2012

Brands by name

Popular brands