manualshive.com logo in svg

Ford Ranger 2012, Owner'S Manual, Page: 109 / 276

Share
Download
Ford Ranger 2012 Owner'S Manual Download Page 109

2-wheel drive vehicles

Press and hold the switch for one second
to deactivate engine traction control, trailer
stability control and brake traction control.
Hill start assist remains active.

4-wheel drive vehicles

Note:

All the stability control (ESP)

functions are reactivated when 

2H

 position

is selected.

Transfer shift switch in 

4H

 position:

•

Press and hold the switch for one
second to deactivate engine traction
control and trailer stability control. Hill
descent control, hill start assist and
brake traction control remain active.

Transfer shift switch in 

4H

 or 

4L

 position:

•

Press and hold the switch for five
seconds to deactivate engine traction
control, trailer stability control and
brake traction control. Hill descent
control and hill start assist remain
active.

Transfer shift switch in 

2H

 position:

•

Press and hold the switch for one
second to deactivate engine traction
control, brake traction control and
stability control including trailer
stability control. Hill descent control
and hill start assist remain active.

107

Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing

Stability Control

Summary of Contents for Ranger 2012





















































































































































































































































































Reviews:

No comments