manualshive.com logo in svg

Ford Ranger 2012, Owner'S Manual, Page: 214 / 276

Share
Download
Ford Ranger 2012 Owner'S Manual Download Page 214

Menu

Clock settings

Display settings

System check

MyKey (If Equipped)

Bluetooth On

Allows you to turn the Bluetooth® feature
on /off.

BT Devices

Allows you to add, delete, connect,
disconnect and set a primary device.

Set defaults

Allows you to return to the factory default
settings. This operation will 

NOT

 erase

your indexed information. (phonebook, call
history, text messages and paired devices)

Master reset

Allows you to completely erase 

ALL

information stored on SYNC (all
phonebook, call history, text messages and
all paired devices) and return to the factory
default settings.

Install on SYNC

Allows you to install applications you have
downloaded.

System Info

Allows you to access vehicle SYNC
system's version information.

Voice settings

Allows you to customize your VR (Voice
Recognition) system to provide more or
less instruction and feedback.

Browse USB

Allows you to explore through all
supported digital media on your media
device connected to the USB port.

Mobile Apps (If Equipped)

The system enables voice and manual
control of Ford Applink™ enabled
smartphone apps. Once an app is running
through Ford Applink™ , you can control
main features of the app through voice
commands and manual controls.

Emergency Assistance (If Equipped)

In the event of a crash which deploys an
airbag or activates the fuel pump shut-off,
the system may contact the emergency
services through a paired and connected
cell phone.

Menu Structure - SYNC™-Phone

The SYNC phone settings can be accessed
using the 

PHONE

 button on the audio or

navigation unit.

Phone

Dial a number

Redial

Phonebook

212

Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing

SYNC™

 (If Equipped)

Summary of Contents for Ranger 2012





















































































































































































































































































Reviews:

No comments