Ford Ranger 2012 Page 173 Owner'S Manual Download

Page: 173 / 276

WARNINGS

Switch the ignition off and apply park
brake fully before lifting vehicle.

It is recommended that the wheels
of the vehicle be chocked, and that
no person should remain in a vehicle

that is being jacked.

No person should place any portion
of their body under a vehicle that is
supported by a jack.

WARNING:

Do not get under a

vehicle that is supported by a jack.

E166722

WARNING

WARNING:

The jack supplied with

this vehicle is only intended for
changing wheels. Do not use the

vehicle jack other than when you are
changing a wheel in an emergency.

The jack, wheel brace, and jack handle are
located in the cab.

Single Cab

E133591

Fold the left-hand side seat back
forward.

2. Remove the locking strap and remove

the tools.

E135841

171

Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing

Wheels and Tires

Summary of Contents for Ranger 2012





















































































































































































































































































Search results

Summary of Contents for Ranger 2012

Reviews:

Related manuals for Ranger 2012

Brands by name

Popular brands

Ford Ranger 2012, Owner'S Manual

Search results

Summary of Contents for Ranger 2012

Reviews:

Related manuals for Ranger 2012

Brands by name

Popular brands