manualshive.com logo in svg

Ford Ranger 2012, Owner'S Manual, Page: 218 / 276

Share
Download
Ford Ranger 2012 Owner'S Manual Download Page 218

Helpful Hints

•

Any external noise such as wind noise
and road vibrations may prevent the
system from correctly recognizing the
voice commands.

•

After pressing the 

VOICE BUTTON

,

wait until after the tone sounds and
"

Listening

" icon appears before saying

a command. Any command spoken
prior to this will not be recognised by
the system.

•

Speak normally, without long pauses
between words.

•

The system can be interrupted at any
time by pressing the 

VOICE BUTTON

and say "HELP" for assistance.

•

Speak out the voice commands from
a considerable distance from the SYNC
microphone.

•

To cancel the on going voice session,
say "CANCEL" or press seek up or seek
down arrow button.

•

To say the commands directly without
listening to system prompts, press the

VOICE BUTTON

 once to abort the

prompts.

System Interaction and Feedback

The system provides feedback through
audible tones, prompts, questions and
spoken confirmations depending on the
situation and the chosen level of
interaction (voice settings). You can
customize the voice recognition system to
provide more or less instruction and
feedback.

The default setting is to a standard
interaction mode in order to help you learn
to use the system. You can change these
settings at any time.

Adjusting the Interaction Level

E142599

Push the 

VOICE BUTTON

 and

say any of the following:

The System

When You Say

Provides less audible interaction and more
tone prompts.

"INTERACTION MODE ADVANCED"

Provides more detailed interaction and
guidance.

"INTERACTION MODE NOVICE"

The system defaults to the novice interaction mode.

Confirmation prompts are short questions
the system asks when it is not sure of your
request or when there are multiple possible
responses to your request. For example,
the system may ask "

Phone, is that

correct?

".

216

Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing

SYNC™

 (If Equipped)

Summary of Contents for Ranger 2012





















































































































































































































































































Reviews:

No comments