Ford Ranger 2012 Owner'S Manual Download Page 65

Page: 65 / 276

With ignition off, press and hold the
light dimming button. For item location:
See

Gauges

(page 51). and switch

ignition to on.

2. The display will show the language set

menu active.

3. Press the

SET/RESET

to select

between the different languages.

4. Press and hold the

SET/RESET

button to set the currently displayed
language.

5. A chime will be heard to confirm the

selection.

6. The display will then return to normal

operation.

Units of measure

To select metric or imperial units for
outside temperature display:

Change display mode to "Outside
Temperature."

2. Press and hold the

SET/RESET

button for more than two seconds and
the units will change.

Toggling the units of measure using this
display will affect the following displays:
•

Outside air temperature.

•

The temperature display in the
automatic climate control.

•

The set temperature in the
multi-function display.

Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing

Information Displays

Summary of Contents for Ranger 2012





















































































































































































































































































Search results

Summary of Contents for Ranger 2012

Reviews:

Brands by name

Popular brands

Ford Ranger 2012, Owner'S Manual

Search results

Summary of Contents for Ranger 2012

Reviews:

Brands by name

Popular brands