Ford Ranger 2012 Page 72 Owner'S Manual Download

Page: 72 / 276

Switching the air conditioning on
and off

E91393

Press the

A/C

button to switch the air

conditioning on and off. The light in the
button indicates the status of the A/C.

Note:

The A/C operates only when the

engine is running.

Switching off the automatic

climate control

E132690

Press the

power

button to switch the

system on and off. When switched off,
recirculated air is selected but it is also
possible to manually select the fresh air.

HEATED WINDOWS AND
MIRRORS

Note:

Make sure the engine is running

before operating the heated windows.

Heated Windshield

(If Equipped)

Press the button to clear the
heated windshield of thin ice and
fog. Press the button again to

switch it off. The heated windshield turns
off after a short period of time.

Heated Rear Window

E72507

Press the button to clear the
heated rear window of thin ice
and fog. Press the button again

to switch it off. The heated rear window
turns off after a short period of time.

Note:

Do not use razor blades or other

sharp objects to clean or remove decals
from the inside of the heated rear window.
The vehicle warranty does not cover
damage caused to the heated rear window
grid lines.

Heated Exterior Mirrors

(If Equipped)

When you switch the heated rear window
on, the heated exterior mirrors turn on.

Note:

Do not remove ice from the mirrors

with a scraper or adjust the mirror glass
when it is frozen in place.

Note:

Do not clean the mirror housing or

glass with harsh abrasives, fuel or other
petroleum-based cleaning products.

Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing

Climate Control

Summary of Contents for Ranger 2012





















































































































































































































































































Search results

Summary of Contents for Ranger 2012

Reviews:

Related manuals for Ranger 2012

Brands by name

Popular brands

Ford Ranger 2012, Owner'S Manual

Search results

Summary of Contents for Ranger 2012

Reviews:

Related manuals for Ranger 2012

Brands by name

Popular brands