manualshive.com logo in svg

Ford Ranger 2012, Owner'S Manual, Page: 121 / 276

Share
Download
Ford Ranger 2012 Owner'S Manual Download Page 121

A

B

C

E131684

Roof Rail

A

Sports bar

B

Box rail

C

Note:

Do not sit or stand on items B or C.

Note:

Do not use item C to secure loads.

Note:

To reduce fuel consumption, roof rails

should be removed when not in use.

LOAD RETAINING FIXTURES

Tie Down Points

WARNINGS

Use the tie down points only for
restraining the loads within the
loadspace. Using tie down points for

any other purpose may lead to serious
injury or vehicle damage. Do not use the
tie down points for towing.

Each tie down point has a maximum
load rating. Exceeding this may lead
to serious injury and vehicle damage.

WARNINGS

Always inspect the tie down points
before use.

Note:

The number of tie down points may

vary depending on your vehicle model.

Type 1

WARNING

Do not exceed the load rating for the
tie down points.

119

Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing

Load Carrying

Summary of Contents for Ranger 2012





















































































































































































































































































Reviews:

No comments