manualshive.com logo in svg

Ford Ranger 2012, Owner'S Manual, Page: 175 / 276

Share
Download
Ford Ranger 2012 Owner'S Manual Download Page 175

2. Lower the seat back.

3. Remove the locking strap.

4. Remove the bolt.

5. Remove the jack.

Spare Wheel

Note:

The spare wheel is located

underneath the rear of the vehicle.

E79153

1.

Assemble the handle.

E133589

2. Fully insert the jack handle into the

guide hole. Turn counter-clockwise
until the wheel rests on the ground, and
there is slack in the cable.

E133590

3. Pass the bracket and cable through the

wheel opening.

Jacking and Lifting Points

WARNING

Use only the specified jacking points.
If you use other positions, you may
damage the body, steering,

suspension, engine, braking system or the
fuel lines.

173

Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing

Wheels and Tires

Summary of Contents for Ranger 2012





















































































































































































































































































Reviews:

No comments