Note:
When you drive to another part of the
country, stations that broadcast on
alternative frequencies and are stored on
preset buttons, may be updated with the
correct frequency and station name for that
area.
Autostore Control
This will store up to a maximum of the six
strongest signals available, either from the
AM or the FM waveband and overwrite the
previously stored stations. You can also
store stations manually in the same way
as other wavebands.
1.
Press and hold
function button 1
or
the
RADIO
button.
2. When the search is complete, sound is
restored and the strongest signals are
stored on the autostore presets.
Traffic Information Control
Many stations that broadcast on the FM
waveband have a TP code to signify that
they carry traffic program information.
Turning Traffic Announcements On and
Off
Before you can receive traffic
announcements, you must press either the
TA
or
TRAFFIC
button. A TA display will
appear to show the feature is switched on.
If you are already tuned to a station that
broadcasts traffic information,
TP
will also
be displayed. Otherwise the unit will search
for a traffic program.
When traffic information is broadcast, it
will automatically interrupt normal radio
or CD playback and
Traffic
announcement
will appear in the display.
If a non-traffic station is selected or
recalled using a preset button, the audio
unit will remain on that station unless
TA
or
TRAFFIC
is turned off, then on again.
Note:
If TA is on and you select a preset or
manual tune to a non TA station no traffic
announcement will be heard.
Note:
When you are listening to a non
traffic announcement station and turn
traffic announcement off and on again a TP
seek will occur.
Traffic Announcement Volume
Traffic announcements interrupt normal
broadcasts at a preset minimum level that
is usually louder than normal listening
volumes.
To adjust the preset volume:
•
Use the volume control to make the
necessary adjustment during an
incoming traffic announcement
broadcast. The display will show the
level selected.
Ending Traffic Announcements
The audio unit will return to normal
operation at the end of each traffic
announcement. To end the announcement
prematurely, press
TA
or
TRAFFIC
during
the announcement.
Note:
If you press TA or TRAFFIC at any
other time it will switch all announcements
off.
Automatic Volume Control
When available, automatic volume control
(AVC) adjusts the volume level to
compensate for engine noise and road
speed noise.
1.
Press the
MENU
button and select
AUDIO
or
AUDIO SETTINGS
.
2. Select
AVC LEVEL
or
ADAPTIVE
VOL
.
3. Use the left or right arrow button to
adjust the setting.
4. Press the
OK
button to confirm your
selection.
201
Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing
Audio System
